Collection: Pureco Sealers & Polyurethane Sealers

Matte Sealer

Semi Gloss Sealer

• is designed for use over any of our paints, sealing transfers and decoupage.
• The sheen is between a matte and satin sheen.
• It is easy clean, self levels for use on interiors, exteriors and water clean up.
• It can be tinted with any of our paint colours and used as a glaze. 
• Will repel staining and is a fantastic product for so many uses.
• Stir with a broad stirrer, ensure your surface is dry, clean & dust free.
• Always do a test patch to see if this product is right for your project.
• Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.
• No more than 2 coats should be required.
• Allow your first coat to dry thoroughly before applying your next coat.
• Coverage is 13 square metres per litre, depending on application technique and surface roughness.
• Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
• Can be used for gluing down & sealing wallpaper.
• This product should not be used if air temperature is below 10 degress or above 35 degrees.
• Do not apply in direct sunlight.
• Use in a well ventilated area.
• Water clean up. 100% washable.
• 200ml RRP $23
• 600ml RRP $4t

Gloss Sealer

• Gloss sealer is our highest sheen level sealer.
• Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.
• Can be brushed, rollered or wiped on. Gloss sealer is quite a sticky consistancy and water can be added to heplp application.
• If spraying add up to 10% water.
• 600ml will cover 10-12 square metres
• Apply 2 coats as required
• Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 40 Minutes; Recoat: 3 Hours.
• water clean up
• Exterior/Interior use
• This product should not be used if air temperature is below 10 degress or above 35 degrees.
• Do not apply in direct sunlight.
• Use in a well ventilated area.
• Water clean up. 100% washable.
• 200ml RRP $23
• 600ml RRP $45

Satin Sealer

Satin sheen, non-yellowing, water based sealant.

• is designed for use over any of our paints, sealing transfers and decoupage.
• The sheen is satin sheen.
• It is easy clean, self levels for use on interiors, exteriors and water clean up.
• It can be tinted with any of our paint colours and used as a glaze. 
• Will repel staining and is a fantastic product for so many uses.
• Stir with a broad stirrer, ensure your surface is dry, clean & dust free.
• Always do a test patch to see if this product is right for your project.
• Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.
• No more than 2 coats should be required.
• Allow your first coat to dry thoroughly before applying your next coat.
• Coverage is 13 square metres per litre, depending on application technique and surface roughness.
• Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
• Can be used for gluing down & sealing wallpaper.
• This product should not be used if air temperature is below 10 degress or above 35 degrees.
• Do not apply in direct sunlight.
• Use in a well ventilated area.
• Water clean up. 100% washable.
• 600ml RRP $45
• 200ml RRP $23

POLYURETHANE SEALERS

• Our polyurethane finishes are water based, non yellowing, self levelling and most of all super tough and exterior grade.
• Perfect for use on high traffic furniture pieces, kitchen cabinets and outdoor furniture
• You can add up 30% water to thin out if you wish, just decant into and recycled container and mix well. You can also use a mister.
• Can be applied with a brush, roller, sprayer and sponge.
• Allow 4 hours between coats, 2 coats are recommended.
• Cure time is 7-14 days depending on the weather. 25 degrees is optimum curing temperature.
• 250ml RRP $34
• 600ml RRP $55 
• 1450ml RRP $90